beautypg.com

2. connecting the cable to the printer, Caution – Oki Pos 407II User Manual

Page 9

background image

– –

3-2. Connecting the Cable to the Printer

Note that the interface cable is not provided. Please use a cable that meets specifications.

CAUTION

Before connecting/disconnecting the interface cable, make sure that power to the printer and

all the devices connected to the printer is turned off. Also make sure the power cable plug is

disconnected from the AC outlet.

3-2-1. Parallel Interface Cable
() Make sure the printer is turn off.

(2) Affix the ferrite core onto the cable as shown in

the illustration.

() Pass the fastener through the ferrite core.

() Loop the fastener around the cable and lock it.

Use scissors to cut off any excess.

() Connect the interface cable to the connector on

the rear panel of the printer.

(6) Fasten the connector clasps.

Ferrite core

Interface cable

5 cm
(maximum)

Fastener

Parallel interface
cable