Oki Pos 407II - Manual (Page 24)

– 0 –
5. Consumable Parts and AC Adapter
When consumable parts have run out, use those specified in the table below.
Make sure that the AC adapter specified in the table is used.
Use of consumable parts or AC adapter which are not specified in the table may result in dam-
age to the printer, fire or electric shock.
5-1. Thermal Paper Roll
(1) Paper roll specification
Width: .±0. mm or .±0. mm or .±0. mm
Outer roll diameter: ø00 mm or less
Take up paper roll width: 0 +0.
-
mm or +0.
-
mm or +0.
-
mm
Thickness: 6~0 µm
Core outer/inner diameter
Paper thickness Core outer Core inner
6~ µm ø± mm ø± mm
6~ µm ø± mm ø. mm
~0 µm ø± mm ø. mm
Printed surface: Outer edge of roll
Tail end handling: Do not use paste or glue to secure the paper roll or its core.
Do not fold the tail end of the paper.
() Recommended paper
Manufacture Product name Quality characteristics/Use Paper thickness
(µm)
Mitsubishi Paper Mills
Limited
P0AG normal type paper 6
HP0A high image stability paper 6
HP0AB- high image stability paper
P0AB normal type paper, card ticket
P0AC- normal type paper, card ticket
P0AC normal type paper, card ticket 0
P0AD normal type paper, card ticket 0
P0AE- normal type paper, card ticket 0
PB60 color paper: Red & Black
PB0 color paper: Blue & Black
Mitsubishi HiTec Paper
Flensburg GmbH
F0 normal type paper 60