Fn setting [fn. setting] a n, Menu setting method – Olympus LS-20M User Manual

Page 87

Fn Setting [Fn. setting]

A n

When functions are registered in the Fn button,
each time the Fn button is pressed, you can set or
change the menu of registered function.

Setting

[Off]: No functions will be allocated to the button.
[INDEX]: (

☞ P.52).

[Rec Mode]: (

☞ P.67).

[Rec Level]: (

☞ P.68).

[Play Mode]: (

☞ P.74).

[Equalizer]: (

☞ P.74).

[Property]: (

☞ P.76).

[Light]: (

☞ P.77).

[Image Quality]: (

☞ P.71).

[Reverse Angle Recording]: (

☞ P.71).

[Magic Movie]: (

☞ P.72).

[White Balance]: (

☞ P.72).

[Exposure Comp.]: (

☞ P.73).

To call up a registered function:

When the Fn button is pressed, menu setting
display of registered function will appear:
[Rec Mode]:

[PCM] [MP3]: The recording rate can be
configured for each file format.

[Rec Level]:

[Manual] [Auto]: You can configure whether to
adjust the recording level automatically or to
adjust it manually. When the [Rec Level] is set to
[Manual] you can configure the limiter function.

[Play Mode]:

[File] [File Repeat] [Folder]
[Folder Repeat] [All] [All Repeat]

[Equalizer]:

[Off] [ROCK] [POP] [JAZZ] [User]
Select [User] to save your own custom

equalizer settings.

[Property]:

File and folder information can be confirmed
from the menu screen.

[Light]:

[On] [Off]: By pressing the Fn button, you can
turn the backlight of the sub LCD on or off.

[Image Quality]:

The image quality (resolution) and recording
rate can be configured.

[Magic Movie]:

[On]:[ROCK] [POP] [PIN HOLE] [SKETCH]

[WATERCOLOR] [Off]

[White Balance]:

[Auto] [Sunny] [Cloudy] [Fluorescent]
[Incandescent] [Quick Operation]

[Exposure Comp.]:

You can adjust the exposure from [-2.0] to [+2.0]
in increments of 1/3.

[Reverse Angle Recording]:

[On] [Off]

If the Fn button is pressed during operation, the
registered function is performed:
[INDEX]:

With each press of the Fn button, an index mark
is added.

Notes

• When the registered function is [Rec Mode],

[Rec Level], [Image Quality], [Reverse Angle
Recording], [Magic Movie], [White Balance],
[Exposure Comp.] or [Property], these will
not function if the Fn button is pressed during
operation. While the recorder is during stop
mode, press the Fn button.

• The following functions can be used also when

the recorder is operating.

[Light], [INDEX]

• The following functions can also be used during

playback.

[Play Mode], [Equalizer]

Menu setting method