Olympus LS-20M - Manual (Page 80)

80
4
EN
Voice sync recording [V-Sync. Rec]
A
Voice sync recording starts when a voice louder
than the voice sync level (detection level) is
detected. When the voice becomes low, recording
will automatically stop. When setting voice
sync recording, if the input falls below the voice
sync level (detection level) or the set detection
time elapses, the recorder will stop the current
operation, create a new file, and switch to standby
mode.
1 Select [V-Sync. Rec] from the menu on
the [Rec Menu].
• For details on how to enter the menu
settings, see “Menu setting method”
(
☞ P.65).
+− button
9 0 button
`OK button
2 Sets the detection time.
[Off]:
Disables this function.
[1 second] [2 seconds] [3 seconds]
[4 seconds] [5 seconds] [10 seconds]:
Sets the detection time.
If the input is equal to or below the specified
level (recording level) during the set
detection time, the recorder will stop the
current operation, create a new file, and
switch to standby mode.
Adjusting the voice sync level for recording:
1 Press the REC (
s) button and prepare
to record.
• If the [Rec Level] setting is set to [Auto],
proceed to Step 4.
• If the [Rec Level] setting is set to [Manual],
[Check rec. level?] flashes.
2 Press the
9 or 0 button to adjust
the recording level.
• The level can be adjusted from [00] to [30].
The higher the number, the higher the level
and the larger the indicator position on the
level meter.
3 Press the
`OK button.
• The screen switches to the voice sync level
setting.
• Each time the
`OK button is pressed, the
setting is switched between the recording
level and voice sync level.
4 Press the
9 or 0 button to adjust
the voice sync level.
• The voice sync level can be set to any of 15
different values.
• The higher the value, the more sensitive the
recorder will be to sounds. At the highest
value, even the faintest sound will activate
recording.
Menu setting method
Menu setting method