Olympus LS-20M - Manual (Page 25)

25
1
EN
• Follow the same steps by pressing the
9
or
0 button to select the next item, and
pressing the + or − button to set.
• You can select between 12 and 24 hour
display by pressing the LIST button while
setting the hour and minute.
Example: 10:38 P.M
10:38 PM
(Initial setting)
22:38
• You can select the order of the “Month”,
“Day” and “Year” by pressing the LIST
button while setting them.
Example: March 24, 2011
3M 24D 2011Y
(Initial setting)
24D 3M 2011Y
2011Y 3M 24D
Setting the time and date beforehand enables
easier file management.
The recorder stores the time information
automatically with the recording.
When you use the recorder for the first
time, when you insert the battery after
the recorder has not been used for a long
time, or when the clock is not set, [Set Time
& Date] appears. When “Hour” flashes,
perform the setup from Step 1.
1 Press the
9 or 0 button to select
the item to set.
• Select the item from the “Hour”, “Minute”,
“Year”, “Month” and “Day” with a flashing
point.
2 Press the + or − button to set.
Setting time and date [Time & Date]
+− button
9 0 button
`OK button
3 Press the
`OK button to complete the
setting.
• The clock will start from the registered time
and date. Set all the items in accordance
with a time signal, etc. and then press the
`OK button.
Se
tt
in
g t
im
e a
n
d d
a
te