Olympus LS-20M - Manual (Page 26)

26
1
EN
Note
• If you press the
`OK button without setting all
the items, the settings will be discarded.
1 While the recorder is during stop
mode, press the MENU button.
• The menu will appear on the display
(
☞ P.65).
Changing the time and date
While the recorder is during stop mode, press
and hold the STOP (
4) button to display the
Time and Date, Remaining Memory and File
Format. If the current time and date is not
correct, set it using the procedure below.
+ − button
`OK button
MENU button
2 Press the + or − button to select
[Device Menu] tab.
• You can change the menu display by moving
the settings tab cursor.
3 Press the
`OK button to move the
cursor to the item to set.
• [Device Menu] will appear on the display.
4 Press the + or − button to select [Time
& Date].
5 Press the
`OK button.
• [Time & Date] will appear on the display.
• The
“Hour” will flash on the display,
indicating the start of the Time and Date
setup process.
The following steps are the same as Step 1
through Step 3 of “Setting time and date
[Time & Date]” (
☞ P.25).
6 Press the MENU button to close the
menu screen.
Setting time and date [Time & Date]
Se
tt
in
g t
im
e a
n
d d
a
te