Olympus LS-20M - Manual (Page 28)

28
1
EN
LOCK
2 Push the SD card inward to unlock it,
and let it eject partially.
• The SD card is visibly out of the slot and can
be removed safely.
3 Close the card cover securely.
Notes
• Releasing your finger quickly after pushing the
SD card inward may cause it to eject forcefully
out of the slot.
• Depending on the SD card maker or type, some
SD cards may not be recognized properly due to
incompatibility issues with the recorder.
• Be sure to read the instruction manual supplied
with the SD card before using it.
• In the case when the SD card cannot be
recognized, remove the SD card then put it in
again to see if this recorder recognizes the SD
card.
• The processing performance reduces in an SD
card when you repeat writing and deleting. In
this case, format the SD card (
☞ P.90).
• There is no guarantee that all SD cards work with
the recorder.
About the SD Card
When the SD card is write protected, there will
be a display reading [SD card is locked]. Before
inserting the card, turn off the write protection
function.
If the write protection
switch is facing the
[LOCK] direction,
recording and other
functions cannot be
carried out.
LOCK
See the Olympus support homepage for a
list of SD cards verified for this recorder in
accordance with the Olympus standards.
http://olympus-europa.com/
Although verified SD card makers are shown
on the Olympus homepage, Olympus doesn’t
guarantee compatibility in all cases.
Also, according to changes in card
specifications, support may become no longer
available.
Inserting and ejecting an SD card
In
se
rt
in
g a
n
d e
je
ct
in
g
a
n
S
D
c
a
rd