Oki B 6300 - Manual (Page 53)

9.3 On Using NetWare 49
9.3 On Using NetWare
This section explains the precautions and limitations of using this printer with NetWare.
Setting Up the Printer
• If there is not enough memory after the port status is set to [Enable], the display might
display a message indicating insufficient memory and the port status might be set to
[Disable] automatically. When this happens, either set the port status of ports not in use
to [Disable] or increase the memory size.
• Take note of the following limitations on the names:
Item Limitation
Device Name Use only single-byte alphanumeric characters.
Cannot use mathematical symbol (+ =), dot (.), backslash (\), tilde (~).
There is no difference between underscore(_) and space( ).* 1
There is no difference between the capital and small letters of half-width
alphanumeric characters.
Tree Use only single-byte alphanumeric characters.
Cannot use mathematical symbol (+ =), dot (.), backslash (\), tilde (~).
There is no difference between underscore(_) and space( ).
There is no difference between the capital and small letters of half-width
alphanumeric characters.
File Server Name Use only single-byte alphanumeric characters.
Cannot use mathematical symbol (+ =), dot (.), backslash (\), tilde (~).
There is no difference between underscore(_) and space( ).* 1
There is no difference between the capital and small letters of half-width
alphanumeric characters.
Context Use only single-byte alphanumeric characters.
Cannot use mathematical symbol (+ =), dot (.), backslash (\), tilde (~).
There is no difference between underscore(_) and space( ).*
2
There is no difference between the capital and small letters of half-width
alphanumeric characters.
Print Server Name Use only single-byte alphanumeric characters.
Cannot use mathematical symbol (+ =), dot (.), backslash (\), tilde (~).
There is no difference between underscore(_) and space( ).* 1
There is no difference between the capital and small letters of half-width
alphanumeric characters.
*1: The following characters cannot be used in the present Netware file server when it is operating in
bindery mode but in order to standardise the directory service and the limitations, there is no
limitation at the printer without taking into consideration the type of operating mode:
semicolon (;), colon (:), asterisk (*), question mark (?), comma (,), double quotation ("), greater
than/less than symbol (<>), bracket ([ ]), pipe (|)
*2: Mathematical symbol (=) and dot (.) cannot be used as context and can be only used as delimiters.