7 printing from a macintosh computer, 1 printing from a macintosh computer, System configuration – Oki B 6300 User Manual

Page 42: Target computers, Set up procedure, Printing from a macintosh computer, 7printing from a macintosh computer

7 Printing From a Macintosh Computer

Printing From a Macintosh
Computer

7.1

Printing From a Macintosh Computer

This section explains the installation procedure for printing from a Macintosh computer.

System Configuration

As the printer supports EtherTalk and LPD protocol, you can print from Macintosh.

Note
• Printing using the LPD protocol is available only with the Mac OS X.

Target Computers

The printer supports a Macintosh or Power Macintosh with the following OS:

• Mac OS 8.6 through 9.2.2

• Mac OS X

Refer to
• User Guide (PostScript Driver)

Set Up Procedure

The setting procedure is as follows:

Setting up the printer

Use the printer control panel or OkiWebRemote to set the following port to [Enable].

• Printing through LPD: LPD port (default: [Enable])

• Printing through EtherTalk: EtherTalk port (default: [Disable])

Note
• For details on how to set the port, refer to the Setup Guide.
• OkiWebRemote allows more detailed settings.

Setting up the Macintosh

Install the printer driver(Adobe PS) for Macintosh. Install the screen font if necessary.

Refer to
• User Guide (PostScript Driver)