Oricom DECT BT9500 - Manual (Page 4)

2
Important
• Avoid exposure of this telephone to moisture or liquid.
• To prevent electric shock, do not open the handset or base cabinet.
• Avoid metallic contact (e.g. metal clips, keys) between the
battery contacts and charging conductors.
• There is a slight chance that the telephone could be damaged by
an electrical storm. It is recommended that users unplug the phone
from the mains supply and telephone socket during a storm.
• Do not use the handset in an explosive hazard area such as
where there is gas leaking.
• Follow the local regulations regarding the disposal of your
packing materials, exhausted batteries and used phone.
Wherever possible, recycle those materials.
• This phone should not be used near intensive care medical
equipment. Persons with pacemakers should consult their
Doctor or cardiologist before using this phone.
• Clean with a dry, soft, lint-free cloth. Never use cleaning agents,
particularly aggressive solvents.
• Because the phone works by sending radio signals between
base station and handset, wearers of hearing aids may
experience interference in the form of a humming noise.
• Your phone can interfere with electrical equipment such as
answering machines, TV and radio sets, clock radios and
computers if placed too close. It is recommended that you
position the base unit at least one metre from such appliances.
• This telephone complies with applicable safety requirements for
exposure to radio waves (EMR). The mean power of this telephone
does not exceed 20mW limit at which point testing is required.
• Privacy of communications may not be ensured when using
this telephone.
• The earpiece of the handset may attract small metal objects
such as staples and pins. Care should be taken when placing
the handset near these items.
• This telephone is not designed for making emergency
telephone calls when the mains power fails. Always have a
corded phone available to be able to make and receive calls to
emergency services if the mains power fails.
• Do not use your telephone during an electrical storm
thunderstorm as it is possible to get an electric shock. Refer to
information contained in White pages directory.
• This phone is designed for connection to a PSTN telephone line or an
analogue extension port of a PBX system. If you connect this device
to a digital extension of a PBX, damage may result to the PBX.
CAUTION
Use only the mains adaptors supplied with this product. Incorrect adaptor
polarity or voltage can seriously damage the unit.
Adaptor for base unit and charger:
Base Unit power supply – Input: 100-240VAC 50Hz 150mA
Output: 6 VDC 450mA
Ext Charger power supply – Input 100-240VAC 50Hz 100mA MAX
Output: 6 VDC 300mA
GettinG started