Oricom DECT BT9500 - Manual (Page 21)

19
Chain dialing
This feature allows you to initiate a dialing sequence from numbers
stored in the phonebook, caller ID history or redial list while you
are on a call.
Chain dialing can be useful if you wish to access numbers other
than phone numbers (such as bank account information or access
codes) from the phonebook, caller ID history or redial list.
Phonebook
1. Press MENU/OK.
2. Press UP/DOWN to scroll to >PHONEBOOK.
3. Press MENU/OK.
4. Press UP/DOWN to scroll to the desired number.
5. Press MENU/OK to dial the displayed number.
Caller ID history (call log)
1. Press MENU/OK.
2. Press UP/DOWN to scroll to >CALL LOG.
3. Press MENU/OK.
4. Press UP/DOWN to scroll to the desired number.
5. Press MENU/OK to dial the displayed number.
Last number redial (redial list)
Press REDIAL to display and dial the most recently dialled number.
If you press REDIAL again within two seconds, the number will not
be dialled.
NOTES
1. You cannot edit a phonebook entry while you are on a call.
2. You cannot copy a caller ID entry into the phonebook while you are on a call.
3. While on a call, only the most recently called number can be reviewed, and
erasing the entry is not allowed.
4. Press and hold TALK OFF/BACK to exit redial, phonebook or caller ID history
when you are on a call.
Calls