Oricom DECT BT9500 - Manual (Page 22)

20
Intercom
If you have more than one handset registered to your base, use the
intercom feature for conversations between handsets.
Call another handset
1. From idle mode, press the intercom button INT, (or press
MENU/OK, then UP/DOWN to INTERCOM and press MENU/OK to
select.)
• If you have a two-handset system, your handset screen shows
CALLING OTHER HANDSET, and automatically rings the other
handset.
• If you have more than two handsets, your screen shows
INTERCOM TO:. Use the dialling keys to select the other
handset(1-5). Your handset screen shows CALLING HANDSET
X. The other handset rings and its screen shows either OTHER
HANDSET IS CALLING or HANDSET X IS CALLING.
2. To answer the intercom call, press TALK/R or SPEAKER on the
other handset. Both handsets now show INTERCOM.
3. To end an intercom call, press TALK OFF/BACK, or place the
handset back in the telephone base or charger.
• You can cancel the intercom call before it is answered by
pressing TALK OFF/BACK on your originating handset.
• If the other handset does not answer the intercom call within
100 seconds, is being used, or is out of range, your originating
handset screen shows UNABLE TO CALL TRY AGAIN and
returns to idle mode.
• Press TALK OFF/BACK or MUTE/CLEAR on the other handset to
temporarily silence the intercom ringer.
Transfer an external call to another handset (for
multi-handset versions only.)
If you are on an external call, you can transfer the external call to
another handset.
1. During an external call, press the intercom button INT. (Or press
MENU/OK, then UP/DOWN to TRANSFER, and press MENU/OK
to select.)
• If you have a two-handset system, your handset screen shows
CALLING OTHER HANDSET. The other handset rings and its
screen shows OTHER HANDSET IS CALLING.
• If you have more than two handsets, your screen shows
TRANSFER TO:. Use the dialling keys to select the other
handset(1-5). Your screen CALLING HANDSET X. The other
handset rings and its HANDSET X IS CALLING.
interCom