Oricom DECT BT9500 - Manual (Page 31)

29
Set the Recall time
You may need to change the recall (flash) time if your phone is
connected to a PBX. The recall time options are SHORT(100ms),
MEDIUM(300ms) or LONG(600ms).
1. Press MENU/OK when in idle mode to enter the menu list.
2. Press UP/DOWN to scroll to >FLASH TIME.
3. Press MENU/OK and UP/DOWN to select SHORT, MEDIUM or
LONG.
4. Press MENU/OK to save your choice.
Clear voicemail indication
The handset display includes a voice Mail Indicator, which can be
turned on and off by the caller display service, although it is not
usually available from UK network providers.
If it appears on the display you can turn it off manually.
To manually turn off the new voicemail indicator:
1. Press MENU/OK when in idle mode to enter the menu list.
2. Press UP/DOWN to scroll to >CLR VOICEMAIL.
3. Press MENU/OK, the screen shows TURN OFF INDICATOR?.
4. Press MENU/OK again to turn the voicemail indication off, or
press TALK OFF/BACK to cancel the procedure.
ECO PLUS mode
The base and handsets have an extra low power mode that
reduces the transmission between the base and handsets when
they are not being used. This can be enabled or disabled.
1. Press MENU/OK when in idle mode to enter the menu list.
2. Press UP/DOWN to scroll to >ECO PLUS .
3. Press MENU/OK and UP/DOWN to turn on or off the ECO plus
mode.
4. Press MENU/OK to save the setting.
Change system PIN
A 4-digit system PIN is used to protect against unauthorised use
when changing the system setting of the phone. The default value
is 0000 but can be changed.
1. Press MENU/OK when in idle mode to enter the menu list.
2. Press UP/DOWN to scroll to >SYSTEM PIN.
3. Press MENU/OK and enter the old system PIN. Default is 0000.
4. Press MENU/OK and enter your new system PIN.
5. Press MENU/OK and confirm by re-entering your new system
PIN.
6. Press MENU/OK to save the setting.
personal settinGs