Oricom DECT BT9500 - Manual (Page 10)

8
Base Station Overview
+
- Vol
Vol
1
8 6 7 9
2 3
4
5
11
10
12
13
1 BLUETOOTH LEDs
Steady ON: Bluetooth device is paired to the base.
Flashes: Bluetooth device is in pairing set-up mode.
Off: If Bluetooth device is disconnected.
2 IN USE LED
Flashes when there is an incoming call, or a cordless handset
is using the line.
Steady on when the answering machine is on line.
3 CHARGING LED
On: when the handset is put into base cradle for charging.
4 PAGE
Press to page all registered handsets.
5 CHARGING CRADLE
6 BLUETOOTH KEYS
In Idle, to pair up Bluetooth mobile:
press and hold until “bt” flashes on the display, then release
“C1” or “C2” flashes depending on the key pressed.
In idle, to pair up Bluetooth headset: Press and hold for more
than 5 sec, until the flashing “bt” changes to a flashing “H1” or
“H2”, depending on the key pressed.
7 DELETE
During message playback: press to delete the current
message.
In idle: press twice to delete all previously reviewed messages.
GettinG to know your phone