Oricom DECT BT9500 - Manual (Page 15)

13
• Make sure that your Bluetooth enabled mobile phone has
sufficient signal strength. You may need to move the Bluetooth
enabled mobile phone and telephone base to a location where
the mobile signal may be stronger.
• Charge your Bluetooth mobile phone while it is connected
to the telephone base because your mobile phone’s battery
will discharge faster while it is connected wirelessly to the
telephone base.
• Monitor your mobile phone’s usage because airtime is
deducted from your mobile plan for the duration of the MOBILE
calls.
Refer to the “Bluetooth setup” section to learn how to set up your
Bluetooth device. Refer to the “Pairing a Bluetooth enabled mobile
phone” section on how to operate your Bluetooth devices with your
new telephone system with Bluetooth wireless technology.
Bluetooth setup
To use a Bluetooth enabled mobile phone with your telephone, you
must first pair and connect your Bluetooth enabled mobile phone
with the telephone base.
Pairing a
Bluetooth enabled mobile phone
Before you begin, make sure that your Bluetooth enabled mobile
phone is not connected to any other Bluetooth device. Refer to your
Bluetooth enabled mobile phone user’s manual to learn how to
search for or add new Bluetooth devices.
1. Press and hold either of the Bluetooth buttons on the telephone
base until the corresponding Bluetooth LED is flashing, and the
display LED on the base flashes “bt”, then release the button
and the display will flash “C1” or “C2” depending on which
button you have pressed. The Bluetooth feature is activated.
2. Using your Bluetooth enabled mobile phone, turn on the
Bluetooth feature and search for a new device.
3. Once your Bluetooth enabled mobile phone has found the
BT9500 telephone base, called BT9500 in the Bluetooth list,
select it.
4. Using your Bluetooth enabled mobile phone, enter the PIN of
the telephone base (the default PIN is 0000) to continue the
pairing process.
Pairing a Bluetooth headset
1. Press and hold either of the Bluetooth buttons on the telephone
base until the corresponding Bluetooth LED is flashing, and
the display LED on the base changes from a flashing “bt” to
a flashing “H1” or “H2” depending on which buttton you have
pressed.
2. Using your Bluetooth headset, turn on the Bluetooth feature
and search for a new device.
3. Follow the user’s guide of your Bluetooth headset to finish the
pairing process.
introduCinG Bluetooth