Oricom DECT BT9500 - Manual (Page 12)

10
On when you have a new Voice Mail message.
(This is a caller display service and is not usually
available from UK network providers.)
On when viewing a new call entry in the call log.
On steadily when Bluetooth device #1 or #2 is
connected with the telephone base.
Full battery power level.
2/3 battery power level.
1/3 battery power level.
Flashes when low battery power level is detected,
needs charging.
Animation in cycle. Battery is charging.
Message counter display
Display Description
0F-> --
Displayed briefly when the answering machine
(TAM) is turned OFF.
--
When answering machine is OFF and no new
TAM messages recorded.
0n-> XX
Displayed briefly when the answering machine
(TAM) is turned ON.
00 Steady ON: No voice messages in the TAM.
XX
Flashing: There are XX new messages recorded
where XX is from 01 to 59.
ZZ
Steady ON: There are ZZ old messages in the
TAM memory and no new messages.
XX/FF
Flashing XX alternately with FF: There are XX new
messages recorded and the TAM memory is full.
FF
Flashing : The TAM memory is full and there are
no new messages.
- - /XX
Flashing XX alternately with - -: the Time/date
is not set and there are XX new voice messages
recorded.
GettinG to know your phone