Radio Shack 43-5862 - Manual (Page 65)

Beyond the Basics
Answering an Intercom Page
When the intercom page tone sounds, the display will show the
ID of the station that is paging.
1. To answer an intercom page:
HANDSET: Press /FLASH, INTCM/HOLD, or the ANSWER
soft key. If Auto Talk is on, the handset will
answer when you pick up the handset from the
cradle. If Any Key Answer is on, you can also
press a number key, */TONE, or #.
BASE: Press /FLASH or BACK/HOLD/INTERCOM.
2. To hang up an intercom conversation:
HANDSET: Press or the END soft key.
BASE:
Press END/PAGE.
Room/Baby Monitor
This feature allows you to monitor sounds in another room. Place
a station in the room you wish to monitor; it will function as a
microphone to pick up sound. Any station can be set to function
as a remote speaker, allowing you to monitor sounds in the other
room. You can set up this feature from either a handset or the base.
1. HANDSET: Press the MENU soft key.
BASE: Press MENU/SELECT.
2. Select ROOM MONITOR menu. TO WHICH UNIT? appears.
3. Select the station you want to monitor by using
or .
Then:
HANDSET: Press the OK soft key.
BASE:
Press MENU/SELECT or the SELECT soft key.
4. MONITORING appears on the initiating station, and sound
monitoring is effective immediately.
5. You can turn off the room monitor from either station:
HANDSET: Press or the END soft key, or return the
handset to the cradle.
BASE: Press END/PAGE.
UP01799ZZ_1.indb 65 4/12/2006 12:43:51 PM