Radio Shack 43-5862 - Manual (Page 53)

Beyond the Basics
5. Press MENU/SELECT or the SELECT soft key. You will hear a
confirmation tone.
NOTES
The announcement is in English only.
The announcement and the ringer sound will be
heard alternately until you answer the call.
Your phone will only be able to announce the
incoming caller names when that information is
available for that call. If a private caller rings you,
the announcement will say Private Caller. •
•
•
Using the Caller ID List
You can store up to 100 Caller ID numbers in each handset or the
base. Your handset shares memory between the phonebook and
Caller ID with a total of 100 entries. When the shared memory
is full and when you store a new phonebook entry, the oldest
Caller ID message is overwritten. Once you reach your maximum
phonebook entries of 100, Caller ID information will not be stored
(but it will still display when the call comes in). Your base has
separated memory area for the phonebook and Caller. Therefore
anytime 100 entries are available for Caller ID record in the base.
1. To open the Caller ID list, press
(the right key on the four-
way function key).
2. Use or on the four-way function key to scroll through
the list, or enter a letter on the keypad to jump to the first
caller ID name that starts with that letter.
3. To scroll quickly through the list, press and hold or .
4. To exit the Caller ID list while the phone is in standby:
HANDSET: Press .
BASE:
Press END/PAGE.
To exit the Caller ID list during a call:
HANDSET: Press the BACK soft key repeatedly until you
exit.
BASE: Press BACK/HOLD/INTERCOM repeatedly until
you exit.
UP01799ZZ_1.indb 53 4/12/2006 12:43:47 PM