Radio Shack 43-5862 - Manual (Page 35)

The Basics
When the phone is in standby, press MENU/SELECT.
Select the RINGS/VOLUMES menu, and then the SPEAKER
VOLUME submenu.
Use
or to adjust the speaker volume. Then press
MENU/SELECT or the SELECT soft key. You will hear a
confirmation tone.
To return to standby, press END/PAGE.
T-coil (Handset Only)
The T-coil feature, used by hearing aid users, reduces the
magnetic noise interference generated by digital cordless
phones. Individuals using hearing aides will turn off the hearing
aid microphone to avoid interference issues and turn on T-coil.
By toggling back and forth between T-coil on/off and the hearing
aid microphone on/off, you avoid excessive interference and are
able to hear clearly with the hearing aid device.
When the phone is in standby, press the MENU soft key.
Select the HANDSET SETUP menu, and then the T-COIL
submenu.
Move the cursor to select ON or OFF.
Press the OK soft key. You will hear a confirmation tone.
NOTE
Using the T-coil feature may shorten your battery’s
talk time. Please set to off the T-coil feature when
not using this feature.
1.
2.
3.
4.
1.
2.
3.
4.
UP01799ZZ_1.indb 35 4/12/2006 12:43:40 PM