Radio Shack 43-5862 - Manual (Page 17)

1
The Basics
Insert the two tabs at the
bottom of the narrow end of
the supplied bracket into the
base’s lower tab slots. Then
press down on the bracket’s
latches and insert them into the
upper slots.
Plug the adapter into a
standard AC outlet. Plug the
modular cord’s other end into
a modular phone line jack.
For a wall plate, align the
base’s keyhole slots with
the wall plate studs and
slide the base downward
to secure it.
For direct wall mounting,
route the telephone cord
through the bracket’s
groove. Then align the
base’s keyhole slots with
the mounting screws and
slide the base downward
to secure it.
4.
5.
6.
UP01799ZZ_1.indb 17 4/12/2006 12:43:30 PM