Radio Shack 43-5862 - Manual (Page 18)

The Basics
1
Connecting/Charging the Battery Pack
The phone comes with a rechargeable nickel-metal hydride (Ni-
MH) battery pack in the handset. Before using your phone, you
must connect the battery pack. Then charge it for about 15 - 20
hours.
Press down and slide off the
battery compartment cover.
Lift the battery pack out of the
compartment.
Plug the battery pack’s
connector into the socket
in the compartment (the
connector fits only one way).
Then place the battery pack in
the compartment.
Replace the cover.
To charge the battery pack, place the handset on the base.
The CHARGE indicator on the base lights.
Recharge the battery pack when LOW BATTERY flashes on the
display.
If you have any trouble replacing the battery pack, take the
phone to your local
RadioShack store for assistance.
Notes on Recharging
If the battery pack becomes weak during a call, LOW BATTERY
flashes. When this happens, you cannot make a call until you
recharge the battery pack.
IMPORTANT: Be sure the battery pack is properly
connected before charging. The CHARGE indicator
lights when the handset is on the base, even if the
battery pack is not connected.
1.
2.
3.
4.
5.
•
•
•
UP01799ZZ_1.indb 18 4/12/2006 12:43:31 PM