Rowe CD-100K - Manual (Page 63)

CD-100K Phonograph
2 - 3 8 21822666
Service Mode Menu
The SERVICE MODE menu (referred to as the “MAIN menu”) is the starting point for all service, pricing, and
programming functions. This menu contains the general title for each submenu. Some of the submenus contain
commands only. Other submenus contain both commands and further submenu names. Refer to Figure 2-10, the
CD-100K Service Mode Map, for an illustration of the following menu descriptions:
Security Menu
This menu contains all of the command options that must be executed to display or change a phonograph security
code or enter a security level. This menu also contains a command to change the phonograph ID.
The last SECURITY option, the VOID SERVICE SWITCH option, allows you to completely close the phonograph
door (which places the SERVICE switch in the NORMAL position) and remain in the SERVICE mode.
Modem Menu
This menu contains the programming options for setting up the modem communication.
Audits Menu
The AUDITS menu allows you to display and clear the various cash, play, and popularity totals that are routinely
reset when money is collected.
To enter this menu from the MAIN menu: Type 1.
Attract Mode Menu
Attract mode is designed to draw attention to customers by moving the selection pages.
To enter this menu from the MAIN menu: Type 2.
Message Center Menu
This menu contains the message center day scheduler, date scheduler, and message editor.
Initialize Menu
This menu controls the type of CD initialization that is to be done whenever a disc is changed or moved to a new
disc number. This menu must be used to identify empty CD mechanism slots.
This menu also contains options to change the phonograph’s time and date.