Rowe CD-100K - Manual (Page 152)

Section 2: Installation & Programming
21822666 2-109
Factory setting sets all mic's to paging, and
phonograph type to CD.
Factory setting is RIGHT
volume is 63 (maximum) and equalizers have factory settings.
CD (J41, J42),
Stereo A (BGM) (J40, J43),
Stereo B (J39, J44),
Mono C (BGM) (J38)
904 -906 Mic Routing
Range of each band is 0 to 9 Factory Setting is 1E99999 2E99999 3E99999 4E99999
CH1
9099995
Output Ch.3, and 4
Program Selected
in Mic Keyed Mode
Each mic can be routed to any
or all 6 channels.
L, L1, L2 means those channels
volumes are locked together.
Changing the volume on any L, L1, or
L2 channel will also change the
volume on all like channels.
95 Amp Factory Load
CH3
Factory setting is stereo/stereo
90990
Front-end
Program Selected
in Playing Audio Mode
90996 Muting in Playing Audio Mode
L2
Factory setting is stereo/stereo
9099996-9099999 Volume Control Switch Mask
CH2
Audio/Video Controller Out CH 3&4,
Audio/Video Controller Out CH 1&2,
Front End,
AVC,
Power Amp Out CH1,
Power Amp Out CH2,
Power Amp Out CH3,
Power Amp Out CH4
L2
mono(CH3 + CH4) / mono(CH3 + CH4)
aux(J17) / aux(J18)
mono(CH3 + CH4) / aux(J18)
aux(J17) / mono(CH3 + CH4)
stereo(J23) / stereo(J26)
Playing
Audio
Mode
Factory Setting (11111111) unmutes all
Factory setting is CD (J41, J42)
9094,9095 Attenuates or raises level of outputs to give 1V rms output when
Audio/Video Controller Out CH 3&4,
Audio/Video Controller Out CH 1&2,
Front End,
AVC,
Power Amp Out CH1,
Power Amp Out CH2,
Power Amp Out CH3,
Power Amp Out CH4
STUDIO SOUND AUDIO PROGRAMMING BLOCK DIAGRAM
mono(CH1 + CH2) / mono(CH1 + CH2)
aux(J15) / aux(J16)
mono(CH1 + CH2) / aux(J16)
aux(J15) / mono(CH1 + CH2)
stereo(J19) / stereo(J22)
Each mic can be a paging or karaoke type. Also,
sets phonograph type to CD or Download.
Sets karaoke lead singer to LEFT
or Right channel.
Range is 0 to 50. Factory Setting is 34
CH4
L1
Range 0 to 63. Factory setting is 33.
9096 Equalizer Ch. 1,2 Two 5 band equalizers.
CH1
L1
9099994
Output Ch.1, and 2
Program Selected
in Mic Keyed Mode
L2
L L L S
S L L L
L2 L1 L1 L2
L L S L
909994
Output Ch.3, and 4
Program Selected
in Playing Audio Mode
Controls how fast the volume changes when using
IR remote to adjust volume. Range is 1 to 5.
Factory Setting is 2
CH4
10
L1
98 IR Volume Step
Mic
Keyed
Mode
CH3 CH2
mono(CH3 + CH4) / mono(CH3 + CH4)
aux(J17) / aux(J18)
mono(CH3 + CH4) / aux(J18)
aux(J17) / mono(CH3 + CH4)
stereo(J23) / stereo(J26)
94 Lead Singer
909992 Muting in Mic Keyed Mode
Factory setting is CD (J41, J42)
Range is 0 to 50. Factory Setting is 32.
CD (J41, J42),
Stereo A (BGM) (J40, J43),
Stereo B (J39, J44),
Mono C (BGM) (J38), Unchanged
Factory setting routes all mics to all
channels
9097 Equalizer Ch. 3,4 Two 5 band equalizers.
Option
Factory setting is stereo/stereo
900 -903
Mic Volume Override
Ch 1, 2, 3, 4
ADDITIONAL PROGRAMMING
S means separate. Changing the
volume on a S channel will not affect
other channels.
Loads Factory Setting for the amplifier
Factory Setting (11111111) unmutes all
L1 L2
L L L L
8
9
S S S S
7 S L S L
6 L S L S
909993
Output Ch.1, and 2
Program Selected
in Playing Audio Mode
Disable/enable individual switches when using multiple
volume control units. Factory setting is 11111111111
(all switches enabled).
907 Mic Type
Option
1
2
3
4
5
9090-9093 Attenuates or raises level of Front-end signal to fit into AVC range.
97 Volume Option. There are 10 different options. Factory setting is option 10.
90995
Front-end
Program Selected
in Mic Keyed Mode
mono(CH1 + CH2) / mono(CH1 + CH2)
aux(J15) / aux(J16)
mono(CH1 + CH2) / aux(J16)
aux(J15) / mono(CH1 + CH2)
stereo(J19) / stereo(J22)
Factory setting is stereo/stereo