RCA ProV950HB - Manual (Page 57)

53
P R O V 9 5 0 H / p p . 0 5 1 - 0 5 7 ; 9 6 / 5 / 2 1 / 1 0 : 0 0
G. K . A s s o c i a t e s , To k y o
Connections and
Editing
Connections for Playback on
a TV Using Audio/Video
Jacks
Although you can enjoy playback on the
camcorder’s LCD monitor, you can also play back
tapes on your TV screen.
Connect the camcorder to your TV with the
supplied audio/video cable, as shown.
A/V pack
Caution:
• Make sure that the camcorder, TV and other
equipment to be connected have been turned
off before you make connections. Making
connections with any of the components left
turned on may cause picture noise or
malfunction.
Note:
• When the camcorder is connected to a TV for
playback, the picture on the TV screen may
flicker if the volume on the camcorder is set to
maximum. Should this occur, turn the volume
down (see page 34).
2
Press on the operation button ( )
to select “PLAY”.
PLAY STILL
F
F
R
E
W
Use the Camcorder to Play
Back Tapes on a TV
1
Set the Power switch to VCR.