Roland RD-300GX - Manual (Page 73)

73
Detailed Settings for Each Function ([EDIT] Button)
3. Use the [DEC] [INC] button to select “Load
SETUP,” then press the [ENTER] button.
4. Use the [DEC] [INC] buttons to select the
memory into which you want to load the data.
5. Press the [ENTER] button.
The following screen appears.
fig.disp
6. Use the [DEC] [INC] buttons to select the file
you want to call up, then press the [ENTER]
button.
The confirmation message appears.
fig.disp
If you do not want to load the Setup file, press the [EXIT/
SHIFT] button.
7. Press the [ENTER] button once again to load
the Setup file.
The Setup file is loaded into the RD-300GX.
Be sure never to turn off the power while the load
is in progress.
If you load a file with a name that contains
characters that cannot be displayed by the RD-
300GX, the file name is displayed as “?.”
8. Press the [EDIT] button, extinguishing its
indicator.
Here’s how to delete a previously saved Setup file.
1. Press the [EDIT] button, getting the indicator to
light.
The Edit Menu screen appears.
2. Use the [DEC] [INC] buttons to select “File,”
then press the [ENTER] button.
3. Use the [DEC] [INC] to select “Delete SETUP,”
then press the [ENTER] button.
4. Use the [DEC] [INC] buttons to select the
memory containing the file you want to delete.
5. Press the [ENTER] button.
The following screen appears.
fig.disp
6. Use the [DEC] [INC] buttons to select the file
that you want to delete, and press the [ENTER]
button.
If you choose “ALL,” all Setup files will be deleted.
The confirmation message appears.
fig.disp
If you do not want to delete the file, press the [EXIT/
SHIFT] button.
7. Press the [ENTER] button to delete the file.
8. Press the [EDIT] button, extinguishing its
indicator.
“Executing...” appears in the display while the
deletion is in progress. Be sure never to turn off the
power.
Value Description
INT
The data in the RD-300GX’s internal memory will be
loaded.
USB
The data on USB memory connected to the USB
MEMORY connector on the rear panel will be
loaded.
NOTE
Deleting a Setup File (Delete SETUP)
Value Description
INT
The data in the RD-300GX’s internal memory will be
deleted.
USB
The data on USB memory connected to the USB
MEMORY connector on the rear panel will be deleted.
NOTE
RD-300GX_e.book 73 ページ ２００８年２月１４日 木曜日 午後１時２６分