Roland RD-300GX - Manual (Page 62)

62
Making Detailed Settings for the ONE TOUCH Tones
Use “Key Touch” to adjust the touch sensitivity of the
keyboard.
You can use the “Key Touch Offset” setting to adjust the
sensitivity in greater detail.
fig.disp
When you change the Key Touch setting, the Key
Touch Offset value will be set to “0.”
When “ofst” setting value continues into the
positive or negative direction, the Key Touch’s five-
step value is switched automatically in accordance
with that value.
This sets the sound to play at a fixed volume, regardless of the
strength used to play the keyboard (the velocity).
This sets the interval from the time the key is played to when
the sound is produced.
As the value is decreased, the timing of the sound is delayed
more when more force is used to play the keys.
As the value is increased, the timing of the sound is delayed
more when less force is used to play the keys.
If you choose “MODE 2,” the volume will change more
smoothly in response to your keyboard playing dynamics
(velocity).
Changing the Key Touch
(Key Touch/Ofst)
Parameter Value Description
Key Touch
SUPER
LIGHT
An even lighter setting than LIGHT.
LIGHT
This sets the keyboard to a light
touch. You can achieve fortissimo (ff)
play with a less forceful touch than
usual, so the keyboard feels lighter.
This setting makes it easy to play,
even for children.
MEDIUM
This sets the keyboard to the
standard touch. You can play with
the most natural touch. This is the
closest to the touch of an acoustic
piano.
HEAVY
This sets the keyboard to a heavy
touch. You have to finger the
keyboard more forcefully than usual
in order to play fortissimo (ff), so the
keyboard touch feels heavier.
Dynamic fingering adds even more
feeling to what you play.
SUPER
HEAVY An even heavier setting than
HEAVY.
Ofst
(Offset)
-10–0–+9
The touch sensitivity becomes
heavier as the value increases.
Key Touch value Offset value
NOTE
NOTE
Setting a Constant Volume Level in
Response to the Playing Force
(Velocity)
Parameter Value Description
Velocity
REAL
Volume levels and the way
sounds are played change in
response to the velocity.
1–127
Values for the volume and the
way sounds are played remain
constant.
Changing the Timing of Sounds in
Response to the Velocity
(Velo Delay Sens)
Parameter Value
Velo Delay Sens
(Velocity Delay Sense)
-63–0–+63
Changing How Volume Responds to
the Velocity (Key Touch Mode)
Parameter Value
Key Touch Mode MODE1, MODE2
RD-300GX_e.book 62 ページ ２００８年２月１４日 木曜日 午後１時２６分