Setting parameters, Parameters that can be set, P. 63) – Roland RD-300GX User Manual
Page 63

63
Detailed Settings for Each Function ([EDIT] Button)
The process of changing Tone parameters to create the tones
you like, and changing the settings for various functions is
known as “editing.” When the [EDIT] button is pressed and the
indicator is lit, the RD-300GX switches to “Edit mode.”
You can save edited settings to Setups.
Edited settings are discarded when the RD-300GX’s power is
turned off, so be sure that any settings you want to keep are
saved to a Setup (p. 51).
However, the System settings can be saved in the edit screen.
Therefore, no changes to the settings are lost, even when the
power is turned off.
1.
Press the [EDIT] button, getting the indicator to
light.
The Edit Menu screen appears.
fig.disp
2.
Use the [DEC] [INC] buttons to select a menu,
then press the [ENTER] button.
fig.disp
3.
Use the [DEC] [INC] buttons to select the
parameter to be set, then press the [ENTER]
button.
fig.disp
4.
Use the [DEC] [INC] buttons to set the value.
If you press the [DEC] button and [INC] button
simultaneously, the setting will return to its default value.
5.
If you want to save the setting, press the
[WRITE] button. Then, press the [ENTER]
button.
You can return to Step 3 by pressing the [EXIT/SHIFT]
button.
Unless they have been saved, these settings are
lost when the power is turned off.
6.
When you have finished making the settings,
press the [EDIT] button, extinguishing its
indicator.
The following settings will be stored as common
settings for the entire RD-300GX.
• System
You can set the following parameters in Edit mode.
Setting Parameters
NOTE
Parameters that can be Set
System
Master Tune
Master Volume
SETUP Pedal Shift
SETUP Control Channel
USB Driver
USB Memory Mode
Damper Pedal Polarity
Control Pedal Polarity
Indicator Mode
Part Mode
Temperament
Temperament Key
Rx GM System ON
Rx GS Reset
Audio Volume
Song Stop Mode
Key Touch
Key Touch
Key Touch Offset
Velocity
Velocity Delay Sense
Key Touch Mode
Common
MFX Zone
Control Pedal Function
S1 Function
S2 Function
Tone Parameter
Attack Time
Release Time
Cutoff Frequency
Resonance
Decay Time
Reverb Amount
Coarse Tune
Fine Tune
Bend Range
RD-300GX_e.book 63 ページ 2008年2月14日 木曜日 午後1時26分