Roland RD-300GX - Manual (Page 50)

50
Using the Convenient Functions in Performances
The RD-300GX’s Internal Zone (p. 22) and External Zone (p. 22) Tone settings, effect
settings, and other such settings are collectively referred to as a “Setup.”
Once you’ve stored your preferred settings, and settings for the songs to be performed
as a Setup, you can then switch whole groups of settings during a performance just by
switching Setups.
You can store up to 32 different Setups.
The RD-300GX is shipped from the factory with recommended Setups already prepared.
Now try actually calling up a Setup.
The current settings are erased when a Setup is called up. Be sure to save any Setup
you would like to keep first before calling up another Setup (p. 51).
fig.Q2-16p
1. Press the [SETUP] button, getting the indicator to light.
The following screen appears in the display.
2. Use the [DEC] [INC] buttons or press one of the TONE SELECT buttons to select the Setup
that you want to call up.
By pressing the TONE SELECT buttons you can select four Setups from each button (p. 98).
Try playing the keyboard.
The settings are switched to those of the Setup that has been called up.
Once you’ve selected a Setup, pressing that [SETUP] button will take you to the screen
shown in step 2.
Setups indicated by a “R.” before the name let you enjoy performing with a session-
like feel while playing a Rhythm. Be sure to check it out.
Selecting Stored Settings ([SETUP] Button)
NOTE
RD-300GX_e.book 50 ページ ２００８年２月１４日 木曜日 午後１時２６分