Ricoh AP306 - Manual (Page 37)

Paper and Other Media Supported by This Printer
25
3
Types of paper and other media
❖ Plain paper
• The standard tray can hold up to 250 sheets. *1
• The bypass tray can hold up to 50 sheets. *1
• PAPER FEED UNIT Type305 (option) can hold up to 500 sheets. *1
*1 : Based on paper that is 80 g/m 2 (20 lb) in weight.
• If you print on paper heavier than 105 g/m 2 (28 lb), use the bypass tray.
The bypass tray can hold paper up to 160 g/m 2 (43 lb) in weight.
• If paper is curled or bent, straighten it before loading.
• When printing on the reverse side of plain paper that is already printed on,
you should load it onto the bypass tray and select [Plain (Duplex Backside)]
from [Paper Type:] with the printer driver.
❖ Thick paper
• If you print on paper heavier than 105 g/m 2 (28 lb), use the bypass tray.
The bypass tray can hold paper up to 160 g/m 2 (43 lb) in weight. The print
quality on paper that is thicker cannot be guaranteed.
• The bypass tray can hold up to 25 sheets.
Note
❒ The number of sheets to be set may vary depending on the paper thick-
ness and paper type.
• When printing on thick paper, you should select the thick paper mode
with the printer driver.
• When printing on the reverse side of thick paper that is already printed on,
you should load it onto the bypass tray and select [Thick (Duplex Backside)]
from [Paper Type:] with the printer driver.
• Auto duplex printing onto thick paper is not available.
❖ Adhesive labels
• When printing on adhesive labels, use the bypass tray.
• Load adhesive labels into the tray with the print side face down.
TFWY060E