Ricoh AP306 User Manual

Page 107

Menu Settings

❖

2. Tray Size[*]

You can select the size of the paper tray whenever you set the paper size dial
to “p”.
• B4 JIS
• B5 JIS
• 8.5

5.5

• 8x13
• 8.25x13
• 8.5

• A5

Note

❒ The paper size specified here is applied to all paper trays ( Tray 1, 2 and 3

excluding the bypass tray). You cannot select the paper size individually
for each tray.

❒ A5 and Half Letter are supported only by Tray 1. If you select A5, Tray 2

and 3 ignore the setting, and the default paper size (8.5

13) will be selected

automatically. For more information about loading paper, see P.30 “Load-
ing Paper”.

❖

3. Bypass Use

You can select whether or not the printer should be searched the bypass tray
when "Auto Tray Select" is selected in "Paper Tray:" using the printer driver.
Selecting "Manual" is not searched the bypass tray.
The paper size setting selected with the printer driver overrides the one se-
lected with the operation panel.
• Manual
• Auto/Tray

Note

❒ This item is available when the printer language is set to IPDL-C.

❖

4. I/O Buffer

You can select the size of the I/O buffer. Normally it is not necessary to
change this setting.
• 16KB
• 32KB
• 64KB
• 128KB
• 256KB
• 512KB

This manual is related to the following products:

AP306D