Radio Shack PRO-93 - Manual (Page 61)

61 Trunking Operation
Turning an ID Sub-Bank On or Off
Follow these steps to turn the ID sub-bank on or off dur-
ing the program mode:
1. Press TRUNK repeatedly to select the desired sub-
bank.
2. Press FUNC then 1 to turn the sub-bank on if it is off
or off if it is on.
Follow these steps to turn the ID sub-bank on or off dur-
ing the scan mode:
1. Press FUNC while the scanner is stopped on a voice
channel transmission.
2. Press TRUNK . The display indicates which sub-bank
is turned on or off, and the active sub-bank number
flashes.
3. Press FUNC and the number of the sub-bank you
desire to turn on or off. For example to turn sub-
bank 4 on or off, press
FUNC then 4 .
Locking Out Talk Group IDs
Note: You can only lock out talk group IDs when the
scanner is in the closed mode (see “Open and Closed
Modes” on Page 63).
1. Press PGM .
2. Press TRUNK .
3. Press FUNC ,
8 8 8 8
or
9 9 9 9
to move to the desired bank.
4. Press
8 8 8 8
or
9 9 9 9
to select the ID memory.
5. Press L/OUT to lock out the ID.
BýBýBýBý
appears.
6. To remove the lockout from a trunking ID, manually
select the ID memory, and press L/OUT until ( ( ( (
ээээ
disap-
pears.
You can confirm the ID code while the scanner shows
the text when the received signal is a voice channel.