Turning the key tone on and off, Using the display backlight, Using the keylock – Radio Shack PRO-93 User Manual
Page 48
48
Special Features
TURNING THE KEY TONE ON AND OFF
Each time you press any of the scanner's keys, the
scanner sounds a tone. To turn the scanner's key tone
off or on:
1. If the scanner is on, turn
VOLUME OFF/MAX
counter-
clockwise until it clicks to turn the scanner off.
2. Turn
VOLUME OFF/MAX
clockwise to turn the scan-
ner on.
3
3
3
3
appears.
3. While
3
3
3
3
appears, press
1
to turn on the key tone or
2
to turn it off.
USING THE DISPLAY BACKLIGHT
You can turn on the display's backlight for easy viewing
in dimly lit areas. Press
to turn on the display light
for 5 seconds. To turn off the light before it automatically
turns off, press
again.
Press
for more than 1 second to engage the light as
continuously on. Press
while the backlight is on to
turn it off.
You can select the amount of time the light stays on. Fol-
low these steps to change the illuminated time:
1. If the scanner is on, turn it off and back on again.
3
3
3
3
appears.
2. While
3
3
3
3
is displayed,
press .
3.
1J<ý1Gó FNEýB 1J<ý1Gó FNEýB 1J<ý1Gó FNEýB 1J<ý1Gó FNEýB appears 4. Press 8 8 8 8 or 9 9 9 9 to select п п п п , н н н н , ст ст ст ст or рт рт рт рт ээээ J<:FE;J J<:FE;J J<:FE;J J<:FE;J then press ENTER . USING THE KEYLOCK Once you program your scanner, you can protect it from
accidental program changes by turning on the key lock
feature. When the keypad is locked, the only controls