Radio Shack PRO-93 - Manual (Page 56)

56
Trunking Operation
• On the 900 MHz trunking band, you do not need to
set the base frequency (base, offset, step).
Follow these steps to program 800 MHz band Motorola
trunking.
1. Press PGM then TRUNK to enter the ID program
mode.
2. Press FUNC then
8 8 8 8
or
9 9 9 9
to select the desired
bank.
3. Press MODE and select Motorola trunking mode.
4. Press FUNC then 3. 1J<ý 1Gó FNEý B 1J<ý 1Gó FNEý B 1J<ý 1Gó FNEý B 1J<ý 1Gó FNEý B
êòò)$Qý98J<ôý*FID8C êòò)$Qý98J<ôý*FID8C êòò)$Qý98J<ôý*FID8C êòò)$Qý98J<ôý*FID8C appears.
5. Press
8 8 8 8
or
9 9 9 9
to select *FID8C *FID8C *FID8C *FID8C or +==J +==J +==J +==J and
press ENTER .
• If you are uncertain about the base frequency, use
the default setting. The default setting is *FID8C *FID8C *FID8C *FID8C .
• If you cannot receive with the *FID8C *FID8C *FID8C *FID8C setting,
change to +==J +==J +==J +==J . The base frequency in *FID8C *FID8C *FID8C *FID8C is
851.0125 MHz. The base frequency in +==J +==J +==J +==J is
851.0000 MHz.
Programming Fleet Maps
You must set the fleet map if you want to receive a Mo-
torola Type I system. Fleet maps are included along with
other information about Motorola Type I systems at
www.trunkscanner.com.
Follow these steps to program a fleet map.
1. Press PGM then TRUNK .
2. For each bank you want to program, repeatedly
press FUNC , then
8 8 8 8
or
9 9 9 9
to select the bank.
3. Press FUNC .