Radio Shack PRO-93 - Manual (Page 60)

60
Trunking Operation
9. To store the next ID memory in sequence, press
8 8 8 8
and repeat Step 4.
10. Press SCAN to start scanning.
Notes:
• If you made a mistake in Step 4, %EM8C@;ý % %EM8C@;ý % %EM8C@;ý % %EM8C@;ý % .
appears and the scanner beeps when you press
ENTER . Start again at Step 3.
• You can enter either decimal or AFS code for ED
(EDACS) ID. The default setting is decimal ID
entry. When you press
FUNC then 2 , г"/э=FID8K г"/э=FID8K г"/э=FID8K г"/э=FID8K
appears for about 2 seconds. Now you can enter
the ID code with AFS format.
• If you entered an ID code that is already stored in
another ID channel, LGCý% LGCý% LGCý% LGCý% appears. If you want
to store the ID code, press ENTER. To cancel the
operation, press CL .
Talk Group ID Hold
You can set your scanner to follow a trunking signal that
you want to track during scanning. Hold down
TRUNK for
more than 2 seconds. % ý?FC;э+*ф % э?FC;э+*ф % э?FC;э+*ф % э?FC;э+*ф appears.
When ID hold is activated and the scanner receives a
voice channel, the scan indication
/ / / / at the first digit in the
top line is changed to $ $ $ $ .
To release ID hold, press SCAN or TRUNK .
8Wdaý&#& 8Wdaý&#& 8Wdaý&#& 8Wdaý&#& ED ED ED ED
?:ýD ?:ýD ?:ýD ?:ýDe$ e$e$ e$ý&' ý&' ý&' ý&'
CEJ0ýded[ CEJ0ýded[ CEJ0ýded[ CEJ0ýded[
Next location
8Wdaý&#& 8Wdaý&#& 8Wdaý&#& 8Wdaý&#& ED ED ED ED
?:ýD ?:ýD ?:ýD ?:ýDe$ e$e$ e$ý&& ý&& ý&& ý&&
CEJ0ý&(//( CEJ0ý&(//( CEJ0ý&(//( CEJ0ý&(//(
:kfbý?:ý'#'( :kfbý?:ý'#'( :kfbý?:ý'#'( :kfbý?:ý'#'(
Duplication