Storing text tags, Assigning a text tag to a channel – Radio Shack PRO-93 User Manual
Page 27
27
Operation
3. Repeatedly press
MODE
to select
)+0
)+0
)+0
)+0
(Motorola) or
!
!
!
!
(EDACS).
4. Press
PGM
and select the channel number using
8
8
8
8
or
9
9
9
9
.
5. Enter the UHF trunking frequency and press
ENTER
.
6. Repeat Steps 4 and 5 to enter the other trunking
group frequencies for EDACS or additional control
channel frequencies for Motorola systems.
7. If necessary, press
MODE
to change the receiving
mode.
STORING TEXT TAGS
You can customize your scanner by storing text tags (up
to 12 characters) for easy identification of channel trans-
missions, trunk IDs, or banks.
Assigning a Text Tag to a Channel
1. Press
MANUAL
, enter the channel number where
you want to enter the text, then press
MANUAL
again.
)
)
)
)
and the bank and channel number appear
at the upper left corner of the display (for example:
)стт
)стт
)стт
)стт
).
2. Press
PGM
.
)
)
)
)
changes to
,
,
,
,
.
3. Press
TEXT
. The cursor appears at the third line.
4. Enter the text using the numeral keys (see “Text
Input Chart” on Page 29).
Note: If you make a mistake, press
8
8
8
8
or
9
9
9
9
to
move to the character you want to change.
For example, to identify amateur (ham) radio trans-
missions in the 6 meter range, input "HAM 6m" as
follows:
• "H" is the second letter associated with 4 on the
keypad. Press
4
then
2
.