Radio Shack PRO-93 - Manual (Page 37)

37 Operation
quency and press FUNC then
9 9 9 9
to start searching
down from the highest frequency.
Manually Tuning a Frequency
You can manually set the scanner to move through all
receivable frequencies, or select a specific frequency as
a starting point.
1. Press TUNE . 01*! 01*! 01*! 01*! and the current frequency
appears. The scanner automatically begins tuning
up or down.
2. Use the number keys to enter the frequency where
you want the scanner to start.
3. Press ENTER .
4. Press
8 8 8 8
or
9 9 9 9
to move up or down. When the
scanner finds an active frequency, it stops on the
frequency.
Note: If you press PAUSE while tuning, the scanner
stops tuning and
ээээ
чч чч чч ччээээ ,г1/! ,г1/! ,г1/! ,г1/! ээээ чччччччч appears. Press PAUSE
again, and the scanner resumes tuning.
LISTENING TO THE WEATHER BAND
The FCC (Federal Communications Commission) has
allocated channels for use by the National Oceanic and
Atmospheric Administration (NOAA). Regulatory agen-
cies in other countries have also allocated channels for
use by their weather reporting authorities.
NOAA and your local weather reporting authority broad-
cast your local forecast and regional weather information
on one or more of these channels.
Listening to a Weather Channel
To hear your local forecast and regional weather infor-
mation, press
WX . Your scanner scans through the
weather band then stops within a few seconds on the
strongest weather broadcast.