Radio Shack PRO-93 - Manual (Page 45)

45 Special Features
teresting transmission on a specific channel. When
priority is turned on, the scanner checks that channel ev-
ery 2 seconds, and stays on the channel if there is activ-
ity until the activity stops.
Notes:
• The priority feature does not operate while the scan-
ner receives trunking (voice channel) frequencies.
• If you program a weather channel as the priority
channel, the scanner stays in the priority channel
only when the scanner detects the weather alert
tone.
To program a frequency in the priority channel:
1. Press MANUAL .
2. Use the number keys to enter the channel number
which contains the frequency you want to program
as the priority channel. Then press
MANUAL again.
3. Press FUNC then PRI . , , , ,I@э б I@э б I@э б I@э б?8EE ?8EE ?8EE ?8EE blinks on the
bottom line.
To program the priority channel directly:
1. Press PGM .
2. Press PRI .
3. Enter the frequency you want to enter into the prior-
ity channel, then press ENTER .
Note: This scanner cannot set a channel as the priority
channel if the channel's receive mode is MOT or ED.
To program a weather channel as the priority channel:
1. Press WX .
2. Select the weather channel you want to program as
the priority channel.
3. Press FUNC then PRI . , , , ,I@э б I@э б I@э б I@э б?8EE ?8EE ?8EE ?8EE flashes on the
bottom line two times.