Storing trunking frequencies into channels – Radio Shack PRO-93 User Manual

Page 26

Operation

3. Use the number keys and

DELAY

to enter the fre-

quency (including the decimal point) you want to
store.

If you make a mistake, press

to delete a single

digit or press and hold

about 2 seconds to delete

all digits.

4. Press

ENTER

to store the frequency into the chan-

nel.

Notes:

• If you made a mistake in Step 3,

%EM8C@;ý "I

briefly appears and the scanner beeps when you
press

ENTER

. Start again from Step 3.

• Your scanner automatically rounds the entered fre-

quency to the nearest valid frequency. For example,
if you enter a frequency of 151.553, your scanner
accepts it as

снсфннт

• To have the scanner pause for 2 seconds on this

channel after a transmission before proceeding to
the next active transmission, press

DELAY

to turn

the delay function on. See “Using the Delay Func-
tion” on Page 42. The scanner stores this setting in
the channel.

5. If necessary, press

MODE

to change the receiving

mode.

6. If desired, program a text tag for the channel (see

“Assigning a Text Tag to a Channel” on Page 27).

7. The next channel in sequence is ready for program-

ming. Press

PGM

and then repeat steps 3 through 6.

STORING TRUNKING FREQUENCIES
INTO CHANNELS

1. Press

PGM

and

FUNC

then

to select the

desired bank to program.

2. Press

TRUNK

to enter into trunking mode.