Radio Shack PRO-93 - Manual (Page 39)

39 Operation
The display indicates the type of message, and
sounds an alert or series of beeps which automati-
cally changes every 3 seconds.
2. Press any key except to stop test sound mode.
USING FREQUENCY COPY FUNCTION
You can copy a frequency into a specified channel, a va-
cant channel in a specified bank, or a priority channel.
However, you cannot copy a frequency from the Marine
and CB search bands.
Copying a Frequency into a Specified
Channel
You can copy a frequency into a specified channel when
the scanner stops on that frequency during search mode
or manual tuning.
1. Press FUNC then PGM when you find a frequency.
á?8Eý/KFI<е б?8Eэ/KFI<е б?8Eэ/KFI<е б?8Eэ/KFI<å appears at the bottom line. After about
1 second, the frequency to be copied flashes on the
indicator.
2. Press the desired bank and the channel number
where you want to store the frequency. The display
indicates the bank and channel number. After about
1 second, the frequency to be copied flashes.
3. Press ENTER. All the conditions such as receiving
mode and delay condition are copied on the chan-
nel.
á?8Eý/KFI<ь б?8Eэ/KFI<ь б?8Eэ/KFI<ь б?8Eэ/KFI<ü briefly appears. The scanner auto-
matically returns to search mode.
If you try to copy a frequency which is already
stored, the scanner sounds the notice tone 3 times
after you press
ENTER . LGCô=ýá?OOO LGCô=ýá?OOO LGCô=ýá?OOO LGCô=ýá?OOO appears at the
bottom line. If you want to copy the duplicate fre-
quency anyway, press
ENTER , or if not, press CL to
cancel.