Ricoh Priport JP5000 User Manual
Page 43
Standard Printing
21
1
G
Press the
{{{{
Proof
}}}} key and check
the image density and the image
position of the proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the
[Image
=
]
key. See
❒ If the image density is slightly
dark or light, adjust the image
density using the
{
Speed
} keys.
H
Press the
{{{{
}}}} key.
Note
❒ After printing is completed, the
same number of prints is auto-
matically set for the next job.
❒ To stop the machine during a
multi-print run, press the
{
Clear/
Stop
} key.
I
Open the paper delivery side
plate of the operation panel side.
Note
❒ You cannot open the side plate
on the opposite side.
J
Remove the prints from the paper
delivery tray.
Note
❒ To return the machine to the ini-
tial condition after printing,
press the
{
Clear Modes
} key.
K
Close the paper delivery side
plate.
Program
Clear Modes
Auto Cycle
Proof
Enter
Start
Clear/Stop
TPES060N
Program
Clear Modes
Auto Cycle
Proof
Enter
Start
Clear/Stop
TPES070N
TPEH050E
TPEH060E