Ricoh Priport JP5000 - Manual (Page 297)

Printing onto Various Kinds of Paper
45
1
- - - -To prevent paper misfeeds:
If paper misfeeds occur frequently,
even if you have selected a suitable
paper, follow the steps below.
A Press the [Select] key.
B Select the type of paper misfeed
and frequency with the
{{{{~ ~ ~ ~}}}}, {{{{} } } }}}}},
{{{{| | | |}}}}, or {{{{{ { { {}}}} keys.
C Press the [OK] key.
If paper misfeeds occur frequently in
the paper exit section, even if you are
using standard or thin paper and
have selected [Std.], do the following:
A Set the wing guide to the “Down”
position with the user tools. See
“Deflector Angle” on p.144 “4.
Mode Setting”.
If A4 – B5, 8 1 /
2
"
× 11" thick paper is
not delivered properly to the paper
delivery tray, do the following:
A Set the wing guide to the “Up” po-
sition with the user tools. See “De-
flector Angle” on p.144 “4. Mode
Setting”.