Ricoh Priport JP5000 - Manual (Page 189)

If You Cannot Make Prints As You Want
167
4
If You Cannot Make Prints As You Want
Combine Originals Mode
Problem Cause Action
Misfeeds occur frequently. Improper paper type is se-
lected with the
[Ppr. Type]
key.
Select proper paper type.
See
⇒
P.42 “Printing On
Various Kinds Of Paper”.
When you try to set several
functions at a time, you
cannot set some functions. Some functions cannot be
used together. See
⇒
P.198 “Combination
Chart”.
Parts of the image are not
printed in Edge Erase
mode. Erase margin is too wide. Set a narrower erase mar-
gin with the user tools. See
⇒
P.150 “3-9 Margin Erase
Area”.
Edge margins of original
are too narrow.
Prints are blank or parts of
the image are not printed. The paper feed side/end
plates are not set correctly. Make sure that the paper
feed side/end plates touch
the paper lightly.
Problem Cause Action
Prints are blank or parts of
the image are not printed. Original size and direction
are not correct. You cannot use originals of
different sizes and direc-
tions in Combine Originals
mode. Use originals of
same size and direction.
Print image is not correct. Original set order is not
correct. Set originals face up into
the optional document
feeder. The first original
should be on the top.
Set original face down on
the exposure glass (contact
glass). The first original
should be set first.