Ricoh Camera RDC-i700 - Manual (Page 82)

80
Signature Imprint Mode
This mode enables you to record images imprinted with the name of the
photographer, etc. which you input in a PC and transfer the information to the
camera.
A
Set the mode dial to [ ] and press
the MENU button.
B
Select [SIGNATURE].
C
Select the signature (STORED NAME
or STORED IMAGE) to be added to
the image.
If you select STORED NAME, the name
registered in “Registering Owner Information”
(P.42) will be added.
If you select STORED IMAGE, the image file
created on a PC and transferred to the
camera will be added.
D
Select the location of the signature
and then select [OK].
The signature is now set.
See
• P.33 “How to Use the Radio Button ( )”
Note
• To cancel signature imprint mode, select [NO SIGNATURE].
E
Select [EXIT] to exit the menu display.
mark will be displayed on the LCD
monitor.
F
Press the shutter release button to
take the picture.
Signature Imprint mode display when
the DISPLAY button is pressed.
(Information display
→
P.49)