Ricoh Camera RDC-i700 - Manual (Page 57)

55
3
Shooting
Shooting (Still Picture Mode)
This section explains how to shoot pictures in Still Picture mode. Hold the
camera correctly to keep it steady.
A
Aim the camera at your subject.
Note
• Use macro mode to shoot subjects
closer than about 24 cm.
→
P.69
“Close-up Shooting (Macro Mode)”
B
Press the zoom lever and decide the
size of your subject.
See
• P.54 “Setting the Size of the Subject
(Zoom)”
• P.53 “Checking the Position of the
Subject”
C
Press the shutter release button
lightly with your fingertip.
The shutter release button works in a two-
step action. When you press it lightly
(halfway), the autofocus function is enabled
to focus on the subject automatically. Keep
the camera as steady as possible to ensure
correct focusing.
The AF LED (green) will light when the
subject is in focus and the focus, exposure
and white balance will be set.
Note
• A flashing AF LED indicates that the
subject is out of focus. Use the
focus lock function.
→
P.57 “Focus
Lock Shooting”
• If the “SLOW SHUTTER” message
appears, you are recommended to
shoot with the flash enabled as
camera shake tends to occur in this
situation.
→
P.62 “Changing Flash
Modes”