Ricoh Camera RDC-i700 - Manual (Page 51)

49
3
Shooting
Selecting a Recording Mode
The camera offers five recording modes ( · · · · ). Select the mode
best suited to your photographic needs.
In this section,
(Still Picture) mode is used.
A
Set the mode dial to [ ].
See • P.25 “How to Use the Mode Dial”
The recording data will be displayed on the
LCD panel or LCD monitor.
● Switching the LCD Monitor Display
You can change the display on the LCD
monitor by pressing the DISPLAY button.
The display changes in the following
sequence each time the DISPLAY button is
pressed: Initial display
→
Information display
→
No display
→
LCD monitor off.
→
“LCD
Monitor Display” (See below)
Tips
LCD Monitor Display (Camera Mode)
Press the DISPLAY button to display recording information such as
the recording mode, image quality mode, and recordable picture
count. Each time you press the DISPLAY button, the display will
switch in the following order:
● In Still Picture mode
Initial display Information display No display
LCD
monitor
Off
* , and the recordable time are displayed when the initial
display or information display are displayed in Voice Memo mode or
Motion Picture mode.
→ → →
↑