Ricoh Camera RDC-i700 - Manual (Page 118)

116
Changing Camera Settings
This section explains how to change the camera settings, including formatting
(initializing) the storage memory (P.43), and setting the auto power off, beep
sound and keep settings mode.
Keep Settings
The keep settings mode enables you to save the settings after the camera is
switched off. The following settings can be saved.
• Focus mode
→
P.70 • Flash mode
→
P.62
• Flash strength
→
P.63 • White balance
→
P.66
• Exposure compensation
→
P.64 • ISO sensitivity
→
P.72
• Soft mode
→
P.78 • Recording destination (PC card,
• Date imprint
→
P.71 CF card, internal memory)
→
P.50
• Display language
→
P.119 • Guide List
Note
• The redeye reduction mode will be saved when the flash mode is
saved.
• The contents of the Image Capture Guide List wil be saved when the
Guide list mode is saved.
A
Set the mode dial to [ ].
B
Choose [KEEP SETTINGS].
C
Select the condition for the items
where you wish to keep the settings.
See
• P.33 “How to Use the Radio Button
( )”
Note
• The condition for each item means
as follows.
ON: Keep setting enabled
OFF: Keep setting disabled
D
Select [OK].
The display will return to the Setup menu.