Ricoh Camera RDC-i700 - Manual (Page 58)

56
● Flash LED
When the flash fires, the flash LED (red)
lights when the shutter release button is
pressed lightly.
Note
• During charging, the flash LED will
blink and the display on the LCD
monitor will disappear. Photographs
cannot be taken at this time.
D
Press the shutter release button
down fully without removing your
finger.
A beep will sound and the image will be
displayed and recorded.
Note
• Moving the camera before the beep
sounds may result in a blurred
image.
• You can take photographs with a
voice memo.
→
P.61 “Shooting Still
Pictures and Text with Voice Memo”
To Cancel Recording
When the shutter release button is fully
pressed, a photograph is taken and the
image is displayed on the LCD monitor. At
this time, press the CANCEL button and
when the confirmation message is
displayed, press the shutter release button.
You can set the image display time to your
liking.
→
P.120 “Changing the LCD
Confirmation Time”
Important
Note
• During recording, do not open the battery cover and the EJECT lever
cover or remove the AC adapter.
• During recording, the auto focus lamp and the flash lamp will flash on
the LCD panel. Do not turn the mode dial or turn the power off until the
recording process is complete.
You can not switch the recording direction (
) or display the
MENU screen by pressing the MENU button while recording is in
progress.