Pre l iminar y – Runco QUANTUM COLOR Q-750I User Manual
Page 41
Q-750i Series Installation/Operation Manual
25
PRE
L
IMINAR
Y
To install the fixed CineWide base plate on a Q-750i/CineWide:
1.
Place the projector upside down on a blanket or other soft surface.
2.
Place the CineWide base plate on the bottom of the projector.
3.
If you are mounting the projector on a ceiling: Line up the three holes on the left
and right mounting rails (included with the projector ceiling mount kit) with those on
the projector and base plate.
4.
Secure the CineWide base plate (and ceiling mounting rails, if needed) to the projector
with the Pan-Head Phillips screws provided with the CineWide lens base plate.
1. Do not use the mounting screws provided with the ceiling
mounting kit. Use only the hardware provided with the CineWide
lens base plate.
2. DO NOT OVER-TIGHTEN THE SCREWS.
Caution