Runco QUANTUM COLOR Q-750I - Manual (Page 101)

Q-750i Series Installation/Operation Manual 85
PRE
L
IMINAR
Y
7.1
Q-750i Specifications Table 7-1 lists the Q-750i specifications.
7. Specifications
Table 7-1. Q-750i Specifications
Projector Type: Digital Light Processing™ (DLP™),Single-Chip, 16:9
SuperOnyx™ DMD™ with InfiniLight
TM
Illumination
Illumination: RGB InfiniLight
TM
LEDs for 135% NTSC color gamut with
Runco Smart Color
TM
and Personal Color Equalizer
TM
Native Resolution: Full HD, 1920 x 1080 (16:9)
Aspect Ratios: 4:3, Letterbox, 16:9, VirtualWide, Cinema, Virtual Cinema
Video Standards: HDMI and DVI with HDCP for digital video, Component and
RGB HDTV (1080p, 1080i, 720p), Component and RGB EDTV
(576p, 480p), Component, Composite and S-Video SDTV
(576i, 480i), RGB SCART with adapter, NTSC (M,4.43), PAL
(B,G,H,I,N,M), SECAM (M)
Video Compatibility: 480i, 480p, 576i, 576p, 720p, 1080i 50/60, 1080p 24/50/60
Picture Size (16:9 Screen): Recommended Width: 72 in. (1.83 m) to 92 in. (2.34 m)
Maximum Width: 108 in. (2.74 m)
Throw Distance
(Factor x Screen Width):
Refer to Table 3-3
Vertical Offset: Standard Q-750i - 60% of screen height above or below lens
center (120% of one half of the screen height)
Q-750i/CineWide or Q-750i/CineWide with AutoScope -
25% of screen height (50% of one half of the screen height)
above or 60% of screen height (120% of one half of the screen
height) below lens center, when projector is inverted
Horizontal Offset: 12.5% of screen width left or right of lens center (25% of one
half of the screen width)
Video Inputs: (2) HDMI; (2) Component (RCA, BNC); (1) RGB (HD15); (1)
S-video; (1) Composite; (1) RS-232; (1) IR Repeater
Control Options: - Discrete IR remote
- Serial commands via RS-232
RS-232 Communication
Parameters: 38400 bps, no parity, 8 data bits, 1 stop bit, no flow control
+12V Outputs: Max. 0.25 Amps, programmable; Tip = +12V; Sleeve =
Ground