Roland MIDI Implementation DP990F - Manual (Page 30)

30
● 0206: Enhancer→Chorus
This effect connects an enhancer and a chorus in series.
No Parameter Value Description
1 Enhancer Sens 0-127 0-127 Sensitivity of the enhancer
2 Enhancer Mix 0-127 0-127
Level of the overtones generated
by the enhancer
3 Chorus Pre Delay 0-125 0.0-100.0 ms
Adjusts the delay time from the
direct sound until the chorus
sound is heard.
4 Chorus Rate Mode 0-1 Hz, note
When this is set to “note,” the
effect is synchronized with the
tempo.
5 Chorus Rate #1 1-127 0.05-10.00 Hz Frequency of modulation (Hz)
6 Chorus Rate 0-21 note Frequency of modulation (note)
7 Chorus Depth 0-127 0-127 Depth of modulation
8 Chorus Balance #2 0-100
D100:0W -
D0:100W
Adjusts the volume balance
between the sound that is sent
through the chorus (W) and the
sound that is not sent through the
chorus (D).
9 Level 0-127 0-127 Output Level
● 0207: Enhancer→Flanger
This effect connects an enhancer and a flanger in series.
No Parameter Value Description
1 Enhancer Sens 0-127 0-127 Sensitivity of the enhancer
2 Enhancer Mix 0-127 0-127
Level of the overtones generated
by the enhancer
3 Flanger Pre Delay 0-125 0.0-100.0 ms
Adjusts the delay time from when
the direct sound begins until the
flanger sound is heard.
4 Flanger Rate Mode 0-1 Hz, note
When this is set to “note,” the
effect is synchronized with the
tempo.
5 Flanger Rate #1 1-127 0.05-10.00 Hz Frequency of modulation (Hz)
6 Flanger Rate 0-21 note Frequency of modulation (note)
7 Flanger Depth 0-127 0-127 Depth of modulation
8 Flanger Feedback 0-98 -98 - +98%
Adjusts the proportion of the
flanger sound that is fed back into
the effect. Negative (-) settings will
invert the phase.
9 Flanger Balance #2 0-100
D100:0W -
D0:100W
Adjusts the volume balance
between the sound that is sent
through the flanger (W) and the
sound that is not sent through the
flanger (D).
10 Level 0-127 0-127 Output Level
● 0208: Enhancer→Delay
This effect connects an enhancer and a delay in series.
No Parameter Value Description
1 Enhancer Sens #1 0-127 0-127 Sensitivity of the enhancer
2 Enhancer Mix 0-127 0-127
Level of the overtones generated
by the enhancer
3 Delay Mode 0-1 ms, note
When this is set to “note,” the
effect is synchronized with the
tempo.
4 Delay Time 0-127 0-2540 ms
Adjusts the delay time from the
direct sound until the delay sound
is heard. (Hz)
5 Delay Time 0-21 note
Adjusts the delay time from the
direct sound until the delay sound
is heard. (note)
6 Delay Feedback 49-89 0 - +80%
Adjusts the proportion of the delay
sound that is fed back into the
effect.
7 Delay HF Damp 0-17
200-8000 Hz,
Bypass
Adjusts the frequency above which
sound fed back to the effect will be
cut. If you do not want to cut the
high frequencies, set this
parameter to Bypass.
8 Delay Balance #2 0-100
D100:0W -
D0:100W
Adjusts the volume balance
between the sound that is sent
through the delay (W) and the
sound that is not sent through the
delay (D).
9 Level 0-127 0-127 Output Level
● 0209: Chorus→Delay
This effect connects a chorus and a delay in series.
No Parameter Value Description
1 Chorus Pre Delay 0-125 0.0-100.0 ms
Adjusts the delay time from the
direct sound until the chorus
sound is heard.
2 Chorus Rate Mode 0-1 Hz, note
When this is set to “note,” the
effect is synchronized with the
tempo.
3 Chorus Rate 1-127 0.05-10.00 Hz Frequency of modulation (Hz)
4 Chorus Rate 0-21 note Frequency of modulation (note)
5 Chorus Depth 0-127 0-127 Depth of modulation
6 Chorus Balance #1 0-100
D100:0W -
D0:100W
Volume balance between the direct
sound (D) and the chorus sound
(W)
7 Delay Mode 0-1 ms, note
When this is set to “note,” the
effect is synchronized with the
tempo.
8 Delay Time 0-127 1-2540 ms
Adjusts the delay time from the
direct sound until the delay sound
is heard. (Hz)
9 Delay Time 0-21 note
Adjusts the delay time from the
direct sound until the delay sound
is heard. (note)
10 Delay Feedback 49-89 0 - +80%
Adjusts the proportion of the delay
sound that is fed back into the
effect.
11 Delay HF Damp 0-17
200-8000 Hz,
Bypass
Adjusts the frequency above which
sound fed back to the effect will be
cut. If you do not want to cut the
high frequencies, set this
parameter to Bypass.
12 Delay Balance #2 0-100
D100:0W -
D0:100W
Adjusts the volume balance
between the sound that is sent
through the delay (W) and the
sound that is not sent through the
delay (D).
13 Level 0-127 0-127 Output Level